閱讀(1.7k) 書簽贊(0) 我要糾錯

OceanBase 分布式計劃的生成

2021-06-30 09:55 更新

OceanBase 數據庫的優化器會分為以下兩大階段來生成分布式的執行計劃。

1. 第一階段：不考慮數據的物理分布，生成所有基于本地關系優化的最優執行計劃。在本地計劃生成后，優化器會檢查數據是否訪問了多個分區，或者是否訪問的是本地單分區表但是用戶使用 HINT 強制采用了并行查詢執行。

2. 第二階段：生成分布式計劃。根據執行計劃樹，在需要進行數據重分布的地方，插入 EXCHANGE 節點，從而將原先的本地計劃樹變成分布式執行計劃。

分布式執行計劃的算子

生成分布式計劃的過程就是在原始計劃樹上尋找恰當位置插入 EXCHANGE 算子的過程，在自頂向下遍歷計劃樹的時候，需要根據相應算子的數據處理情況以及輸入算子的數據分區情況，來決定是否需要插入 EXCHANGE 算子。

如下示例為最簡單的單表掃描：

obclient>CREATE TABLE t1 (v1 INT, v2 INT) PARTITION BY HASH(v1) PARTITIONS 5;
Query OK, 0 rows affected (0.12 sec)

obclient>EXPLAIN SELECT * FROM t1\G;
*************************** 1. row ***************************
Query Plan:
==============================================
|ID|OPERATOR               |NAME    |EST. ROWS|COST  |
------------------------------------------------------
|0 |PX COORDINATOR         |        |500000   |545109|
|1 | EXCHANGE OUT DISTR    |:EX10000|500000   |320292|
|2 |  PX PARTITION ITERATOR|        |500000   |320292|
|3 |   TABLE SCAN          |T1      |500000   |320292|
======================================================

Outputs & filters:
-------------------------------------
  0 - output([T1.V1], [T1.V2]), filter(nil)
  1 - output([T1.V1], [T1.V2]), filter(nil), dop=1
  2 - output([T1.V1], [T1.V2]), filter(nil)
  3 - output([T1.V1], [T1.V2]), filter(nil),
      access([T1.V1], [T1.V2]), partitions(p[0-4])

當 t1 是一個分區表，可以在 TABLE SCAN 上插入配對的 EXCHANGE 算子，從而將 TABLE SCAN 和 EXCHANGE OUT 封裝成一個 job，可以用于并行的執行。

單輸入可下壓算子

單輸入可下壓算子主要包括 AGGREGATION、SORT、GROUP BY 和 LIMIT 算子等，除了 LIMIT 算子以外，其余所列舉的算子都會有一個操作的鍵，如果操作的鍵和輸入數據的數據分布是一致的，則可以做一階段聚合操作，也即 Partition Wise Aggregation。如果操作的鍵和輸入數據的數據分布是不一致的，則需要做兩階段聚合操作，聚合算子需要做下壓操作。

一階段聚合操作如下例所示：

obclient>CREATE TABLE t2 (v1 INT, v2 INT) PARTITION BY HASH(v1) PARTITIONS 4;
Query OK, 0 rows affected (0.12 sec)

obclient>EXPLAIN SELECT SUM(v1) FROM t2 GROUP BY v1\G;
*************************** 1. row ***************************
Query Plan:
| ======================================================
|ID|OPERATOR               |NAME    |EST. ROWS|COST  |
------------------------------------------------------
|0 |PX COORDINATOR         |        |101      |357302|
|1 | EXCHANGE OUT DISTR    |:EX10000|101      |357297|
|2 |  PX PARTITION ITERATOR|        |101      |357297|
|3 |   MERGE GROUP BY      |        |101      |357297|
|4 |    TABLE SCAN         |t2      |400000   |247403|
======================================================

Outputs & filters:
-------------------------------------
  0 - output([T_FUN_SUM(t2.v1)]), filter(nil)
  1 - output([T_FUN_SUM(t2.v1)]), filter(nil), dop=1
  2 - output([T_FUN_SUM(t2.v1)]), filter(nil)
  3 - output([T_FUN_SUM(t2.v1)]), filter(nil),
      group([t2.v1]), agg_func([T_FUN_SUM(t2.v1)])
  4 - output([t2.v1]), filter(nil),
      access([t2.v1]), partitions(p[0-3])

二階段聚合操作如下例所示：

| ============================================================
|ID|OPERATOR                     |NAME    |EST. ROWS|COST  |
------------------------------------------------------------
|0 |PX COORDINATOR               |        |101      |561383|
|1 | EXCHANGE OUT DISTR          |:EX10001|101      |561374|
|2 |  HASH GROUP BY              |        |101      |561374|
|3 |   EXCHANGE IN DISTR         |        |101      |408805|
|4 |    EXCHANGE OUT DISTR (HASH)|:EX10000|101      |408795|
|5 |     HASH GROUP BY           |        |101      |408795|
|6 |      PX PARTITION ITERATOR  |        |400000   |256226|
|7 |       TABLE SCAN            |t2      |400000   |256226|
============================================================

Outputs & filters:
-------------------------------------
  0 - output([T_FUN_SUM(T_FUN_SUM(t2.v1))]), filter(nil)
  1 - output([T_FUN_SUM(T_FUN_SUM(t2.v1))]), filter(nil), dop=1
  2 - output([T_FUN_SUM(T_FUN_SUM(t2.v1))]), filter(nil),
      group([t2.v2]), agg_func([T_FUN_SUM(T_FUN_SUM(t2.v1))])
  3 - output([t2.v2], [T_FUN_SUM(t2.v1)]), filter(nil)
  4 - (#keys=1, [t2.v2]), output([t2.v2], [T_FUN_SUM(t2.v1)]), filter(nil), dop=1
  5 - output([t2.v2], [T_FUN_SUM(t2.v1)]), filter(nil),
      group([t2.v2]), agg_func([T_FUN_SUM(t2.v1)])
  6 - output([t2.v1], [t2.v2]), filter(nil)
  7 - output([t2.v1], [t2.v2]), filter(nil),
      access([t2.v1], [t2.v2]), partitions(p[0-3])

二元輸入算子

二元輸入算子主要考慮 JOIN 算子的情況。對于 JOIN 算子來說，主要基于規則來生成分布式執行計劃和選擇數據重分布方法。JOIN 算子主要有以下三種聯接方式：

Partition-Wise Join

當左右表都是分區表且分區方式相同，物理分布一樣，并且 JOIN 的聯接條件為分區鍵時，可以使用以分區為單位的聯接方法。如下例所示：

obclient>CREATE TABLE t3 (v1 INT, v2 INT) PARTITION BY HASH(v1) PARTITIONS 4;
Query OK, 0 rows affected (0.12 sec)

obclient>EXPLAIN SELECT * FROM t2, t3 WHERE t2.v1 = t3.v1\G;
*************************** 1. row ***************************
Query Plan: 
===========================================================
|ID|OPERATOR               |NAME    |EST. ROWS |COST      |
|0 |PX COORDINATOR         |        |1568160000|1227554264|
|1 | EXCHANGE OUT DISTR    |:EX10000|1568160000|930670004 |
|2 |  PX PARTITION ITERATOR|        |1568160000|930670004 |
|3 |   MERGE JOIN          |        |1568160000|930670004 |
|4 |    TABLE SCAN         |t2      |400000    |256226    |
|5 |    TABLE SCAN         |t3      |400000    |256226    |
===========================================================

Outputs & filters:
-------------------------------------
  0 - output([t2.v1], [t2.v2], [t3.v1], [t3.v2]), filter(nil)
  1 - output([t2.v1], [t2.v2], [t3.v1], [t3.v2]), filter(nil), dop=1
  2 - output([t2.v1], [t2.v2], [t3.v1], [t3.v2]), filter(nil)
  3 - output([t2.v1], [t2.v2], [t3.v1], [t3.v2]), filter(nil),
      equal_conds([t2.v1 = t3.v1]), other_conds(nil)
  4 - output([t2.v1], [t2.v2]), filter(nil),
      access([t2.v1], [t2.v2]), partitions(p[0-3])
  5 - output([t3.v1], [t3.v2]), filter(nil),
      access([t3.v1], [t3.v2]), partitions(p[0-3])

Partial Partition-Wise Join

當左右表中一個表為分區表，另一個表為非分區表，或者兩者皆為分區表但是聯接鍵僅和其中一個分區表的分區鍵相同的情況下，會以該分區表的分區分布為基準，重新分布另一個表的數據。如下例所示：

obclient>CREATE TABLE t4 (v1 INT, v2 INT) PARTITION BY HASH(v1) PARTITIONS 3;
Query OK, 0 rows affected (0.12 sec)

obclient>EXPLAIN SELECT * FROM t4, t2 WHERE t2.v1 = t4.v1\G;
*************************** 1. row ***************************
Query Plan:
 ===========================================================
|ID|OPERATOR                     |NAME    |EST. ROWS|COST |
-----------------------------------------------------------
|0 |PX COORDINATOR               |        |11880    |17658|
|1 | EXCHANGE OUT DISTR          |:EX10001|11880    |15409|
|2 |  NESTED-LOOP JOIN           |        |11880    |15409|
|3 |   EXCHANGE IN DISTR         |        |3        |37   |
|4 |    EXCHANGE OUT DISTR (PKEY)|:EX10000|3        |37   |
|5 |     PX PARTITION ITERATOR   |        |3        |37   |
|6 |      TABLE SCAN             |t4      |3        |37   |
|7 |   PX PARTITION ITERATOR     |        |3960     |2561 |
|8 |    TABLE SCAN               |t2      |3960     |2561 |
===========================================================

Outputs & filters:
-------------------------------------
  0 - output([t4.v1], [t4.v2], [t2.v1], [t2.v2]), filter(nil)
  1 - output([t4.v1], [t4.v2], [t2.v1], [t2.v2]), filter(nil), dop=1
  2 - output([t4.v1], [t4.v2], [t2.v1], [t2.v2]), filter(nil),
      conds(nil), nl_params_([t4.v1])
  3 - output([t4.v1], [t4.v2]), filter(nil)
  4 - (#keys=1, [t4.v1]), output([t4.v1], [t4.v2]), filter(nil), dop=1
  5 - output([t4.v1], [t4.v2]), filter(nil)
  6 - output([t4.v1], [t4.v2]), filter(nil),
      access([t4.v1], [t4.v2]), partitions(p[0-2])
  7 - output([t2.v1], [t2.v2]), filter(nil)
  8 - output([t2.v1], [t2.v2]), filter(nil),
      access([t2.v1], [t2.v2]), partitions(p[0-3])

數據重分布

當聯接鍵和左右表的分區鍵都沒有關系的情況下，可以根據規則計算來選擇使用 BROADCAST 還是 HASH HASH 的數據重分布方式，如下例所示：

注意
只有在并行度大于 1 時, 以下示例中兩種數據重分發方式才有可能被選中。

obclient>EXPLAIN SELECT /*+ PARALLEL(2)*/* FROM t4, t2 WHERE t2.v2 = t4.v2\G;
*************************** 1. row ***************************
Query Plan:
=================================================================
|ID|OPERATOR                          |NAME    |EST. ROWS|COST  |
-----------------------------------------------------------------
|0 |PX COORDINATOR                    |        |11880    |396863|
|1 | EXCHANGE OUT DISTR               |:EX10001|11880    |394614|
|2 |  HASH JOIN                       |        |11880    |394614|
|3 |   EXCHANGE IN DISTR              |        |3        |37    |
|4 |    EXCHANGE OUT DISTR (BROADCAST)|:EX10000|3        |37    |
|5 |     PX BLOCK ITERATOR            |        |3        |37    |
|6 |      TABLE SCAN                  |t4      |3        |37    |
|7 |   PX PARTITION ITERATOR          |        |400000   |256226|
|8 |    TABLE SCAN                    |t2      |400000   |256226|
=================================================================

Outputs & filters:
-------------------------------------
  0 - output([t4.v1], [t4.v2], [t2.v1], [t2.v2]), filter(nil)
  1 - output([t4.v1], [t4.v2], [t2.v1], [t2.v2]), filter(nil), dop=2
  2 - output([t4.v1], [t4.v2], [t2.v1], [t2.v2]), filter(nil),
      equal_conds([t2.v2 = t4.v2]), other_conds(nil)
  3 - output([t4.v1], [t4.v2]), filter(nil)
  4 - output([t4.v1], [t4.v2]), filter(nil), dop=2
  5 - output([t4.v1], [t4.v2]), filter(nil)
  6 - output([t4.v1], [t4.v2]), filter(nil),
      access([t4.v1], [t4.v2]), partitions(p[0-2])
  7 - output([t2.v1], [t2.v2]), filter(nil)
  8 - output([t2.v1], [t2.v2]), filter(nil),
      access([t2.v1], [t2.v2]), partitions(p[0-3])
      

obclient>EXPLAIN SELECT /*+ PQ_DISTRIBUTE(t2 HASH HASH) PARALLEL(2)*/* FROM t4, t2 
              WHERE t2.v2 = t4.v2\G;
*************************** 1. row ***************************
Query Plan:
 ============================================================
|ID|OPERATOR                     |NAME    |EST. ROWS|COST  |
------------------------------------------------------------
|0 |PX COORDINATOR               |        |11880    |434727|
|1 | EXCHANGE OUT DISTR          |:EX10002|11880    |432478|
|2 |  HASH JOIN                  |        |11880    |432478|
|3 |   EXCHANGE IN DISTR         |        |3        |37    |
|4 |    EXCHANGE OUT DISTR (HASH)|:EX10000|3        |37    |
|5 |     PX BLOCK ITERATOR       |        |3        |37    |
|6 |      TABLE SCAN             |t4      |3        |37    |
|7 |   EXCHANGE IN DISTR         |        |400000   |294090|
|8 |    EXCHANGE OUT DISTR (HASH)|:EX10001|400000   |256226|
|9 |     PX PARTITION ITERATOR   |        |400000   |256226|
|10|      TABLE SCAN             |t2      |400000   |256226|
============================================================

Outputs & filters:
-------------------------------------
  0 - output([t4.v1], [t4.v2], [t2.v1], [t2.v2]), filter(nil)
  1 - output([t4.v1], [t4.v2], [t2.v1], [t2.v2]), filter(nil), dop=2
  2 - output([t4.v1], [t4.v2], [t2.v1], [t2.v2]), filter(nil),
      equal_conds([t2.v2 = t4.v2]), other_conds(nil)
  3 - output([t4.v1], [t4.v2]), filter(nil)
  4 - (#keys=1, [t4.v2]), output([t4.v1], [t4.v2]), filter(nil), dop=2
  5 - output([t4.v1], [t4.v2]), filter(nil)
  6 - output([t4.v1], [t4.v2]), filter(nil),
      access([t4.v1], [t4.v2]), partitions(p[0-2])
  7 - output([t2.v1], [t2.v2]), filter(nil)
  8 - (#keys=1, [t2.v2]), output([t2.v1], [t2.v2]), filter(nil), dop=2
  9 - output([t2.v1], [t2.v2]), filter(nil)
  10 - output([t2.v1], [t2.v2]), filter(nil),
      access([t2.v1], [t2.v2]), partitions(p[0-3])

以上內容是否對您有幫助：

← OceanBase 分布式執行和并行查詢

OceanBase 分布式執行計劃調度 →

寫筆記

我要補充